LABELMATE S-100 LABEL SLITTER (REQUIRES CAT 2 REWINDER)

LABELMATE Label Slitters allow you to print small labels several across ("up") and then slit them to the desired width. This multiplies your print efficiency by a factor equal to the number of labels across, and dramatically increases the life and efficiency of your print head and ribbons.

The LABELMATE Models S-100 and S-200 are rugged High-Speed, Heavy-Duty Label Slitters that require no power themselves. They are designed to be used with the LABELMATE CAT-2 Label Rewinder and, for the highest efficiency off-line use, with a Label Unwinder. The CAT-2 Label Rewinder does the work as it pulls the label web through the cutting blades.

The Model S-100 Heavy-Duty Label Slitter includes 2-blades. It is shown here with the optional Preset Counter PC-1. Slitters can be used in either "in-line" or in an "off-line" mode. In "in-line" use, the Slitter is positioned between the printer output and a LABELMATE CAT-2 Label Rewinder. The slitting speed is determined by the printer output speed. In "off-line" use, the Slitter is used with a LABELMATE Unwinder and a CAT-2 Rewinder to achieve maximum slitting convenience and throughput. With slitting speeds up to 30-inches per second in "off-line" mode, you’ll make fast work of big slitting jobs. Off-line slitting is recommended for production operations or for three or more blades because of easier set-up than in-line slitting.

Product Documents

• Home
• Expertise
• Products
• Downloads
• Support
• Account
• Corporate